China ceramic glazed borders, listels and baseboards page 3

►Introduction

We offer more than one hundred models of ceramic glazed borders, baseboards and floor decoration.

Baseboard is mainly used in wall foot, normal sizes are 600x120, 600x130 and 800x120mm which could be used to match Ceramic Floor Tile 300x300, 400x400, 450x450mm, also suitable for matching Polished Porcelain Tile 600x600 and 800x800mm.

Besides of using as wall foot, it could also be used as floor border or floor decoration line to divide different areas in a big room.

►Technical Data

Dimensions and surface quality

Test Item		Test Method	Provisions of Standard	Test Result	Judgement
Length and width		EN ISO10545-2	The deviation, in percent of the average size for each tile (2 or 4 sides) from the work size: ±0.5%	+0.10% ~ +0.21%	PASS
Length and width		EN ISO10545-2	The deviation, in percent of the average size for each tile (2 or 4 sides) from the average size of the 10 test spacimens (20 or 40 sides): ±0.5%	-0.05% ~ +0.05%	PASS
Thickness	Average size	EN ISO10545-2	---	6.9mm	---
Thickness	Devintion	EN ISO10545-2	The deviation, in percent of the average thickness of each tile from the work size thickness: ±10%	-0.33% ~ +1.63%	PASS
Straightness of sides		EN ISO10545-2	The maximum deviation from straightness,in percent, related to the corresponding work sizes: ±0.3%	-0.04% ~ +0.02%	PASS
Rectangularity		EN ISO 10545-2	The maximum deviation from rectangularity, in percent, related to the corresponding worksizes: ±0.5%	-0.07% ~ +0.09%	PASS
Surface flatness	Centre curvature	EN ISO10545-2	Centre curvature, related to diagonal calculated from work size: -0.3% ~ +0.5%	+0.14% ~ +0.12%	PASS
	Edge curvature		Edge cruvature, related to the corresponding work size: -0.3% ~ +0.5%	+0.02% ~ +0.10%	PASS
	Warpage		Warpage, related to the diagonal calculated from the work size: ±0.5%	-0.05% ~ +0.07%	PASS
Surface quality		EN ISO10545-2	A minimum of 95% of the tiles shall be free from visible defects that would impair the appearance of a major area of tiles	PASS	PASS

Physical properties

Test Item	Test Method	Provisions of Standard	Test Result	Judgement
Water absorption	EN ISO10545-3	Average>10%, Individual minimum value 9%. When the average exceeds 20%, this shall be indicated by te manufacturer.	Average: 16.8% Individual minimum: 16.3%	PASS
Breaking strength	EN ISO10545-4	Thickness<7.5mm, Not less than 200N	614N	PASS
Modulus of rupture	EN ISO10545-4	Thickness≤7.5mm; minimum 15 MPa	26.1 MPa	PASS
Thermal shock resistance	EN ISO10545-9	Test method available	Fully resistant	PASS
Moisture expension	EN ISO10545-10	Test method available	<0.01%	---
Crazing resistance	EN ISO10545-11	Required	Fully resistant	PASS
Frost resistance	EN ISO10545-12	Required	Fully frost resistant	PASS

Chemical properties

Test Item		Test Method	Provisions of Standard	Test Result	Judgement
Resistance in Chemicals	Resistance to low concentrations of acids and alkalis	EN ISO10545-13	Manufacturer to state classification	GLA	---
Resistance in Chemicals	Resistance to low household chemicals and swimming pool salts	EN ISO10545-13	Minimum GB	GA	PASS
Resistance to staining		EN ISO10545-14	Minimum Class 3	Class 5	PASS

►Baseboard Using Tips

If you are using Polished Porcelain Tile for floor, a baseboard cut from same Polished Porcelain Tile Collection but in dark color will be a best choice. Cut size could be 100x600, 120x600 or 150x600mm from Original Tile Size 600x600mm or 130x800, 150x800mm from Original Tile Size 800x800mm depends on your taste.

If you are using Rustic Stone or Glazed Porcelain Tile for floor, a baseboard cut from same collection of Tile but in darker color will be the best solution. Cut size is in the same suggestion as Polished Porcelain Tile.

1 2 3